AFC Product Catalog
Accessories, Trims & Adhesives
Complete your flooring installation with the correct transition profiles, adhesives, and surface preparation products. All trim profiles are compatible with AFC SPC and LVT collections. Adhesives are MAPEI-certified for Soundstop installations.
SPC Transition Trims
All SAR Floors transition profiles are 94" long with 20 pieces per box. Available in colors to match your SPC or LVT collection.
| Profile | Thickness × Width | Length | Pcs / Box | Use Case |
|---|---|---|---|---|
| T-Mold | 5/16" × 1 3/4" | 94" Long | 20 | Same-height floor-to-floor transitions at doorways and room dividers. |
| Reducer | 5/16" × 1 3/4" | 94" Long | 20 | Transitions from SPC/LVT to lower-profile LVT or hardwood at doorways and room entries. |
| End Cap | 5/16" × 1 1/4" | 94" Long | 20 | Exposed flooring edges at sliding doors, hearths, or step-down transitions. |
| Stair Nose | 1" × 2" | 94" Long | 20 | Stair tread nosing for SPC/LVT installations on stairways. |
T-Mold
SAR-TM-94Ideal for transitioning between two floors of the same height.
94" Long
20
5/16"
1 3/4"
Same-height floor-to-floor transitions at doorways and room dividers.
Reducer
SAR-RD-94Perfect for connecting floors of different heights.
94" Long
20
5/16"
1 3/4"
Transitions from SPC/LVT to lower-profile LVT or hardwood at doorways and room entries.
End Cap
SAR-EC-94Used to finish the edge of flooring where it meets a different surface, such as a sliding door or a step down.
94" Long
20
5/16"
1 1/4"
Exposed flooring edges at sliding doors, hearths, or step-down transitions.
Stair Nose
SAR-SN-94Provides a finished edge and added safety for stairs.
94" Long
20
1"
2"
Stair tread nosing for SPC/LVT installations on stairways.
Adhesives & Preparation Products
AFC specifies MAPEI and SAR adhesive systems for all glue-down installations. Ultrabond ECO 399 and Planiprep SC are MAPEI-certified for AFC Soundstop LVP flooring per Letter of Recommendation #2025-031.
MAPEI Letter of Recommendation — AFC Soundstop (LOR #2025-031)
MAPEI Corporation has officially recommended Ultrabond ECO 399 and Planiprep SC for installing AFC Soundstop 3mm LVP flooring over properly prepared concrete substrates. This certification is valid through December 31, 2025.
View MAPEI Certification Letter →SAR5000 Pressure-Sensitive Adhesive
Standard Glue-Down LVT Adhesive
SAR5000 is a high-performance, pressure-sensitive adhesive formulated for glue-down LVT installations. Provides excellent initial grab and long-term bond strength on properly prepared concrete and approved wood substrates.
Ultrabond ECO 399
MAPEI-Certified LVT Adhesive for Soundstop
Ultrabond ECO 399 is a premium, solvent-free, pressure-sensitive adhesive specifically recommended by MAPEI for installing AFC Soundstop 3mm LVP flooring. Suitable for use up to 99% RH — though not a moisture barrier. MAPEI-certified for AFC Soundstop installations per Letter of Recommendation #2025-031.
Primer L
Acrylic Latex Primer for Concrete
Primer L is a concentrated, solvent-free acrylic primer used before the installation of self-leveling underlayment materials on concrete substrates. Tinted green for easy coverage identification. Dilute 1 part Primer L with 3 parts clean water before application.
Planiprep SC
Fiber-Reinforced Skimcoating & Patching Compound
Planiprep SC is a high-performance, polymer-modified, fiber-reinforced cement-based skimcoating and patching compound. Recommended by MAPEI for use prior to Soundstop LVP installations per Letter of Recommendation #2025-031. Rapid-set formula is typically ready for floor installation in 30–60 minutes.
Need Help Specifying the Right Products?
AFC's Spec & Estimate Engine selects the correct adhesive, trim, and prep products for every room automatically — included in every takeoff proposal.
Start a Spec & Estimate →